NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - TO SET CLOCK FORMAT

52
• TO SET ILLUMINATION PATTERN FOR
CALL INDICATION LAMP
The procedure below shows how to set the illumination
pattern (color of Call Indicator Lamp).
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 3: Select Incoming Call.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Illumination.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: Select External Call when setting the illu-
mination pattern for external calls. Select
Internal Call when setting the illumination
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
DT730
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu
↓
User Setting
1
1
1
2
Display
[User Setting]
3
4
5
6
7
Change Password
Peripherals
Talk
OKBack
↓
Security
Incoming Call
Usability
5
5
1
2
[Incoming Call]
3
4
5
6
Headset Ring Volume
OKBack
Ring Volume
Offhook Ring
↓
Headset Ring
Ring Tone
Illumination
1
2