NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - TO SET A LANGUAGE

62
• TO ENABLE/DISABLE VOLUME LEVEL
DISPLAY
Determines whether or not to display the following
volume levels: handset receiver volume, speaker
volume, ringer tone volume and LCD contrast.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
• Press key.
STEP 3: Select Display.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Local Volume.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: Make a selection from the following list.
Select an item by either of the following operations.
• Highlight an item by using , and then press
or OK soft key.
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
DT730/DT710
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu
↓
User Setting
3
3
1
2
[User Setting]
3
4
5
6
7
Change Password
Peripherals
OKBack
↓
Security
Incoming Call
Talk
↓
Display
Usability
2
2
1
2
[Display]
3
4
5
6
Back Light
Language
OKBack
↓
Font Size
Screen Saver
Time Format
Local Volume
↓