NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - Page 86

78
STEP 4: Select Protocol.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: Select a protocol used by the server which
stores the download file.
Select an item by either of the following operations.
• Highlight an item by using , and then press
or OK soft key.
• Press or key, and then press or OK soft
key.
STEP 6: The display goes back to the Download
Menu screen.
When FTP is selected here, go to the
next Step (STEP 7).
When TFTP is selected here, go to the
next STEP 15.
STEP 7: Select FTP Settings.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 8: Select User ID.
Select an item by either of the following operations.
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
1
2
Data Backup/Restore
[Setting]
3
OKMenu
↓
User Setting
Download
↓
3
3
1
2
[Download Menu]
3
4
FTP Settings
OKBack
↓
Download Files
Download Address
↓
Protocol
1
2
1
2
[Protocol]
OK
Back
TFTP
↓
FTP
1
2
4
4
1
2
[Download Menu]
3
4
OKBack
Download Files
Download Address
↓
Protocol
FTP Settings
1