NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone - Page 97

89
• TO RESTORE PERSONAL SETTINGS
DT730/DT710 Series user can restore the personal
settings of DT Series. To download the backup file to
the telephone, the DT Series needs to be connected to
the network that has FTP (TFTP server).
Before starting the download, an IP Address of the
FTP/TFTP Server must be entered from DT Series.
STEP 1: Set up the FTP/TFTP server.
<FTP server>
Put the backup file you want to restore into
the designated directory (for Windows IIS,
the default is “C:\InetPub\ftproot) of the FTP
server.
<TFTP server>
Put the backup file you want to restore into a
desired directory of TFTP server and then
specify it as the directory for downloading.
STEP 2: Display the Menu screen, and select Setting.
STEP 3: Select Data Backup/Restore.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Protocol.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: Select a protocol used by the server which
stores the backup file.
Select an item by either of the following operations.
• Highlight an item by using , and then press
or OK soft key.
• Press or key, and then press or OK soft
key.
Note:
For details on the FTP/TFTP service, contact the
System Administrator.
DT730/DT710
3
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
3
1
2
[Setting]
3
OKMenu
User Setting
Download
↓
Data Backup/Restore
4
4
1
2
[Backup/Restore]
3
4
OKBack
↓
Data Backup
Data Restore
↓
Server Address
5
FTP Settings
Protocol
1
2