2. Desktop Control Utility 1.0
58
Operating the projector (manipulating desktop screen)
The displayed desktop screen can be manipulated by using the USB mouse connected
to the projector. If the button of the projector or remote control is pressed
while the desktop screen is displayed, an auxiliary operation bar is displayed at the
lower left of the screen.
Manipulate the auxiliary operation bar by using the buttons of the projector or remote
control.
Click [OK].
A connection destination selection screen will be displayed.
If the connection destination has not been found as a result of a PC search, search for the
connection destination by inputting the IP address of the personal computer at the connection
destination, click " " on the "PC Search" screen, and click "Input IP Address" and [OK].
Click the personal computer at the connection destination and then [OK].
The desktop screen of the personal computer at the connection destination will be displayed.
12
13
When the desktop screen is displayed, the on-screen menu is not displayed even if
the USB mouse is clicked. To display the on-screen menu while the desktop screen
is displayed, press the button of the projector or remote control twice.
To Next Page
Loading...
