EasyManua.ls Logo

NEC LT265 - Remote Control via HTTP Browser; Browser-Based Projector Control

NEC LT265
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Desktop Control Utility 1.0
59
Desktop Control Utility 1.0
<1> (cut-off icon) •••••••••••• Disconnects communication with the personal computer.
<2> (Shift icon) •••••••••••••• When the highlight is moved to this icon and the button
is pressed, shift lock status is set. The shift lock is canceled if the
highlight is moved to this icon and the button is pressed
again.
<3> (Ctrl icon) ••••••••••••••• When the highlight is moved to this icon and the button
is pressed, control lock status is set. The control lock is canceled if
the highlight is moved to this icon and the button is
pressed again.
<4> (ESC icon) •••••••••••••• The same operation as when the [ESC] key of the personal com-
puter is pressed is performed. This icon is used, for example, to
stop a slideshow of PowerPoint.
Operating the projector (disconnecting communications)
Press the button while the desktop screen is displayed.
An auxiliary operation bar will be displayed at the lower left of the screen.
Move the highlight to (cut-off icon) and press the button.
Communication will be disconnected and a connection bar will be displayed at the lower left of
the screen.
To resume communication, click (PC search icon).
After that, follow steps and on the preceding page.
Communication can also be disconnected by clicking the projector icon on the taskbar
and then clicking "Disconnect" while the desktop screen is displayed.
<1> <2> <3> <4>
1
2
12
13

Table of Contents

Other manuals for NEC LT265

Related product manuals