NEC NEAX 2400 ICS - Page 65

ND-45383 (E) CHAPTER 3
Page 55
Revision CD 1.0
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
Note 1: Switch setting when specifying channels of the signal data link. *
When setting channel number of the signal data link to “0”.
When setting channel number of the signal data link to “1”.
When setting channel number of the signal data link to “2”.
When setting channel number of the signal data link to “3”.
When setting channel number of the signal data link to “4”.
When setting channel number of the signal data link to “5”.
When setting channel number of the signal data link to “6”.
When setting channel number of the signal data link to “7”.
When setting channel number of the signal data link to “8”.
*This switch setting must agree with the switch setting on the associated PA-DAIC card.
SYMBOL CIRCUIT CARD
DRE PZ-CC94/PZ-23ELCK
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON