NEC NEAX 2400 ICS - DLI Card Switch Settings and Mounting

CHAPTER 3 ND-45383 (E)
Page 56
Revision CD 1.0
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
When setting channel number of the signal data link to “9”.
When setting channel number of the signal data link to “10”.
When setting channel number of the signal data link to “11”.
When setting channel number of the signal data link to “12”.
When setting channel number of the signal data link to “13”.
When setting channel number of the signal data link to “14”.
When setting channel number of the signal data link to “15”.
When setting channel number of the signal data link to “16”.
When setting channel number of the signal data link to “17”.
*This switch setting must agree with the switch setting on the associated PA-DAIC card.
SYMBOL CIRCUIT CARD
DRE PZ-CC94/PZ23ELCK
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON
1 2 3 4 5 6 7 8
SW70
ON