NEC NEAX 2400 ICS - Page 94

CHAPTER 3 ND-45383 (E)
Page 84
Revision CD 1.0
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
Note 7: Switch setting for Loop-Back Test
SW01-1,2: for No. 0 DLI
SW01-3,4: for No. 1 DLI SW01-1,3 SW01-2,4
When loop-back test is not performed : OFF OFF
(Normal setting)
When setting the DLI to Local Loop-Back Check : ON OFF
When setting the DLI to Remote Loop-Back : OFF ON
When setting the DLI to Remote Loop-Back Check : ON ON
Note 8: Switch setting specifying BL lamp indications
SW01-6 SW01-7 SW01-8
For No. 0 DLI
The BL lamp indicates the status of No. 0 through No. 7 channel : OFF OFF OFF
The BL lamp indicates the status of No. 8 through No. 15 channel : ON OFF OFF
The BL lamp indicates the status of No. 16 through : OFF ON OFF
No. 23 channel
The BL lamp indicates the status of No. 24 through : ON ON OFF
No. 29 channel
For No. 1 DLI
The BL lamp indicates the status of No. 0 through No. 7 channel : OFF OFF ON
The BL lamp indicates the status of No. 8 through No. 15 channel : ON OFF ON
The BL lamp indicates the status of No. 16 through : OFF ON ON
No. 23 channel
The BL lamp indicates the status of No. 24 through : ON ON ON
No. 29 channel
SYMBOL CIRCUIT CARD
2DLI PA-2DAID