5. Using On-Screen Display
91
DynamicBlack
DynamicBlack enables you to improve the black level of the projector.
Remote Sensor
Set the operating range for the wireless remote control.
Select from the following:
Front/Back
Front
Back
Network Settings
See Network Settings on page 93.
Standby Mode
There are two standby modes available: Normal and Power-Saving. Power-Saving
mode allows you to put the projector in the standby condition to consume less power
than Normal.
Note:
Be sure to connect the projector and computer while the projector is in standby
mode and before turning on the computer.
To Next Page
Loading...
