NEC NP4100 - Electrical Specifications

8. Specifications
125
Electrical Specifications
Inputs
1 Analog RGB (Mini D-Sub 15P),
1 Analog RGB R/Cr, G/Y,B/Cb, H, V(BNC x 5),
1 Digital RGB (DVI-D 24P),
1 Component Y, Cb/Pb, Cr/Pr(RCA x 3),
1 Component (Mini D-Sub 15P) shared with COMPUTER 1 IN,
1 S-Video (Mini DIN 4P),
1 Video, 3 Stereo Mini Audio, 2 (L/R) RCA Audio,
1 Remote Control (Stereo Mini)
Outputs 1 RGB (Mini D-Sub 15P), 1 Stereo Mini Audio, 1 Screen Trigger
PC Control 1 PC Control Port (D-Sub 9P), 1 GPIO (Mini D-sub 15P)
USB Port 1 B Type (for Service)
LAN Port RJ-45
External Control RS232, IR, LAN, GPIO
Color Reproduction 16.7 million colors simultaneously, Full color
Compatible Signals*4
Analog:
VGA/SVGA/XGA/WXGA/WXGA+/SXGA/SXGA+/UXGA
480i/480p/576i/576p/720p/1080i
Digital:
VGA/SVGA/XGA/WXGA/WXGA+/SXGA/SXGA+
480p/576p/720p/1080i
Video Bandwidth RGB: 100 MHz (-3dB)
Scan Rate
Horizontal: 15 kHz to 90 kHz (RGB: 31 kHz or over)
Vertical: 50 Hz to 85 Hz
Sync Compatibility Separate Sync/Composite Sync/Sync on G
Horizontal Resolution
540 TV lines: NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60
300 TV lines: SECAM
Built-in Speaker 3W x 2
Power Requirement 100 – 240V AC, 50/60Hz
Input Current 7.5A
Power Consumption
710W in Dual Lamp Normal mode / 580W in Dual Lamp Eco mode
375W in Single Lamp Normal mode / 315W in Single Lamp Eco mode
< 30W in Standby mode Normal
< 1W in Standby mode Power saving
*4 An image with higher or lower resolution than the projector’s native resolution (NP4100:
1024 x 768/NP4100W: 1280 x 800) will be displayed with scaling technology.