NEC NP4100 - Adjusting the Focus;Zoom Manually; Adjusting by Using the OSD Control Panel

4. Convenient Features
51
 Adjusting the Focus/Zoom Manually
The focus and zoom can be adjusted manually from the projector focus/zoom panel or from
the remote control unit. Refer to the following guides to adjust the focus and zoom manually.
Adjusting by Using the OSD Control Panel
1.
Press the Focus or Zoom
button on the projector
panel to display the
appropriate window.
2.
Adjust the focus/zoom
using the increase and
decrease buttons as
required.
3.
Press Exit to return to the
projected image.