NEC NP4100 - Source Menu Descriptions and Functions

5. Using On-Screen Display
67
 Source Menu Descriptions and Functions
The Source menu displays all supported image sources.
Select the required source from the menu using ▲ or ▼ and press Enter to confirm.
ITEM DESCRIPTION
Computer 1
Select the source connected to the Computer 1 input
(see Connecting Your PC or Macintosh Computer on page 31).
Computer 2
Select the source connected to the Computer 2 input
(see Connecting Your PC or Macintosh Computer on page 31).
Computer 3
Select the source connected to the Computer 3 input
(see Connecting Your PC or Macintosh Computer on page 31).
Component
Select the source connected to the Component input
(see Connecting Your DVD Player with Component Output on
page 34).
Video
Select the source connected to the Video input
(see Connecting Your VCR on page 35).
S-Video
Select the source connected to the S-Video input
(see Connecting Your VCR on page 35).
Note:
If an XGA signal is not correctly recognized on NP4100W, set "WXGA Mode" to
Off (see page 99).
To check if the signal is recognized, go to "Source" under "Information" menu (see
page 102).