8. Specifications
138
FUNCTION SETTING DESCRIPTION
Picture Panel
Brightness ▲▼ – Increases or decreases the
brightness adjustment value
Contrast ▲▼ – Increases or decreases the contrast
adjustment value
Color ▲▼ – Increases or decreases the color
adjustment value
Hue ▲▼ – Increases or decreases the hue
adjustment value
Sharpness ▲▼ – Increases or decreases the
sharpness adjustment value
Controls the video adjustments of the
projector
Source Select Panel Computer1 – Switches to the COMPUTER 1 IN
connector
Computer2 – Switches to the COMPUTER 2 IN
connector
Computer3 – Switches to the COMPUTER 3 IN
connector
Component – Switches to the COMPONENT IN
connectors
Video – Switches to the VIDEO IN connector
S-Video – Switches to the S-VIDEO IN connector
This switches the input connector of the
projector
Projector Status Panel Refresh – Updates the panel with the latest
information available
Lamp 1 Life Remaining – Displays the remaining
life of Lamp1 as a percentage
Lamp 1 Hours Used – Displays the number of
hours Lamp1 has been used
Lamp 2 Life Remaining – Displays the remaining
life of Lamp2 as a percentage
Lamp 2 Hours Used – Displays the number of
hours Lamp2 has been used
Filter Hours Used – Displays the number of hours
Filter has been used.
Error Status – Displays the status of errors
occurring within the projector
This displays the status of selected
projector functions
Note:
The functions that can be controlled will vary depending on the signal being input
to the projector (see
Selecting a Source on page 40 for more information).
To Next Page
Loading...
