5. Using On-Screen Display
83
Lamp Select Examples:
Reference: The lamp switching procedure is different between Dual and Single for Lamp
Select as shown below.
Example 1 – When lamp select is Dual and mode select is 24[H]:
This indicates the lamp is turned on.
This indicates the lamp is turned off.
(*) Selecting 12[H] for Mode will update the switching time in 12 hours.
Example 2 – When lamp select is Single and mode select is 24[H]:
This indicates the lamp is turned on.
This indicates the lamp is turned off.
(*) Selecting 12[H] for Mode will update the switching time in 12 hours.
To Next Page
Loading...
