NEC PA600X - 7 Optimizing Computer Signal Automatically; 8 Turning Up or Down Volume

12
Thissectiondescribeshowtoturnontheprojectorandtoprojectapictureontothescreen.
1 Flow of Projecting an Image
Step 1
• Connectingyourcomputer/Connectingthepowercord(→ page 13)
Step 2
• Turningontheprojector(→ page 14)
Step 3
• Selectingasource(→ page 16)
Step 4
• Adjustingthepicturesizeandposition(→ page 17)
• Correctingkeystonedistortion[KEYSTONE](→ page 22)
Step 5
• Adjustingapictureandsound
- Optimizing a computer signal automatically (→ page 24)
- Turning up or down volume (→ page 24)
Step 6
• Makingapresentation
Step 7
• Turningofftheprojector(→ page 25)
Step 8
• Afteruse(→ page 26)
2. Projecting an Image (Basic Operation)
Downloaded From projector-manual.com NEC Manuals