NEC PA600X - 10 After Use

14
2. Projecting an Image (Basic Operation)
Standby Blinking Power On
Steady orange light Blinking blue light Steady blue light
 Turning on the Projector
1. Remove the lens cap.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will turn to blue and the projector
will become ready to use.
TIP:
• Whenthemessage“PROJECTORISLOCKED!ENTERYOUR
PASSWORD.” is displayed, it means that the [SECURITY]
featureisturnedon.(→page37)
• When the ECO message is displayed, it means that [ON] is
selectedfor[ECOMESSAGE].(→page102)
• PressingbuttonssuchaspowerbuttonandMENUbuttonwill
makesound.Toturnoffthebeepsound,select[OFF]for[BEEP]
fromthemenu.(→page109)
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE:Abluescreen(bluebackground)isdisplayedwhennosignal
isbeinginput(byfactorydefaultmenusettings).
(→ page 214)
Downloaded From projector-manual.com NEC Manuals