NEC PlasmaSync 42XR4 User Manual

En-15
Operations in the Picture-in-picture mode
To move the position of the sub screen, press the cursor

or

button.
To change the size of the sub screen, press the

button.
VIDEO1 RGB/PC
A
B
VIDEO1
RGB/PC
A
B
VIDEO1
RGB/PC
A
B
VIDEO1 RGB/PC
A
B
 button
 button
 button
 button
To make the desired picture active, press the ACTIVE
SELECT button.
ACTIVE
SELECT
button
VIDEO1
RGB/PC
A
B
VIDEO1 RGB/PC
A
B
A
B
VIDEO1 RGB/PC
VIDEO1
A
B
RGB/PC
Bottom Left Bottom Right

button

button

button

button
Top Right

button

button

button

button
Top Left
VIDEO1 RGB/PC
A
B
VIDEO1 RGB/PC
A
B
Selecting the input signals to be displayed
1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Press the PC/RGB, VIDEO1, 2 or DVD/HD1, 2, 3, 4
button to change the selection of the input signal.
The INPUT/EXIT button on the monitor can also be used
to change the selection.
Zooming in on a specific input
1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Use the ZOOM ( or ) button to enlage the picture.
For details, see “DIGITAL ZOOM” on page En-11.
Adjusting the OSM controls
1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Press the MENU/ENTER button to display the MAIN
MENU.
3. Adjust the setting to your preference.
For details, see “OSM (On Screen Menu) Controls” on
page En-16.
Note:
During enhanced split screen, some functions of OSM
controls are not available.

NEC PlasmaSync 42XR4 Specifications

General

Brand	NEC
Model	PlasmaSync 42XR4
Category	Monitor
Language	English