NEC QX-S5500G Series - Page 102

Installation Guide
QX-S5500G Series Ethernet Switches
6. Upgrading software
6-31
2. Update extended BootRom
3. Update basic BootRom
0. Return to boot menu
Enter your choice(0-3):
2) Enter 1 in the Boot ROM update menu to upgrade the full Boot ROM.
The file transfer protocol submenu appears:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3):
3) Enter 2 to set the FTP parameters.
Load File Name :update.btm
Server IP Address :192.168.0.3
Local IP Address :192.168.0.2
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0
FTP User Name :switch
FTP User Password :123
Table 6-9 FTP parameter description
Item Description
Load File Name
Name of the file to download (for example, update.btm).
Server IP Address
IP address of the FTP server (for example, 192.168.0.3).
Local IP Address
IP address of the switch (for example, 192.168.0.2).
Subnet Mask
Subnet mask of the switch (for example, 255.255.255.0).
Gateway IP Address
IP address of the gateway (in this example, no gateway is required because
the server and the switch are on the same subnet).
FTP User Name
Username for accessing the FTP server, which must be the same as
configured on the FTP server.
FTP User Password
Password for accessing the FTP server, which must be the same as
configured on the FTP server.