NEC QX-S5500G Series User Manual

Installation Guide
QX-S5500G Series Ethernet Switches
10. Appendix C Ports and LEDs
10-2

NOTE:
A management Ethernet port is used for an upgrade of software and network management (SNMP and Telnet,
etc.). It isn't possible to use for switching between the interface ports.
10.1.3 USB port
The QX-S5500G Series has one OHC-compliant USB2.0 port that can upload and
download data at a rate up to 480 Mbps. You can use this USB port to access the file
system on the flash of the switch, for example, to upload or download application and
configuration files.

NOTE:
Use option items of QX series designation for the USB memory used by the switch.
10.1.4 10/100/1000BASE-T autosensing Ethernet port
Every QX-S5500G Series has 10/100/1000BASE-T autosensing Ethernet ports.
Table 10-3 10/100/1000BASE-T autosensing Ethernet port specifications
Item Specification
Connector type
RJ-45
Interface attributes
10/100/1000Mbps, full duplex
Cable
Category-5 (or above) twisted pair cable
Max transmission distance
100 m (328.08 ft.) over category-5 twisted pair cable
Standards
IEEE 802.3i
IEEE 802.3u
IEEE 802.3ab

NEC QX-S5500G Series Specifications

General

Brand	NEC
Model	QX-S5500G Series
Category	Switch
Language	English