NEC QX-S5500G Series - Appendix B Frus and Compatibility Matrixes; Hot Swappable Power Modules

Installation Guide
QX-S5500G Series Ethernet Switches
9. Appendix B FRUs and compatibility matrixes
9-1
9. Appendix B FRUs and compatibility matrixes
This appendix describes the field replaceable units (FRUs) available for the QX-S5500G
Series and their compatibility.
All the FRUs in this appendix are hot swappable.
9.1 Hot swappable power modules
There are two power supply module slots for the QX-S5524GT-4X1C, QX-S5548GT-4X1C,
or QX-S5524GP-4X1C. You can install one or two power modules for the switch as
required.
The QX-S5524GT-4X2Q or QX-S5548GT-4X2Q can't install PSR150-A1/PSR150-D1.
Table 9-1 The power supply module description
Power module Revision Item Specifications
PSR150-A1 After RD0.
Rated input voltage range
100 VAC to 240 VAC @ 50 Hz or 60 Hz
Max input voltage range:
90 VAC to 264 VAC @ 47 Hz or 63 Hz
Max output power
150W
PSR150-D1 After RB0
Rated input voltage range
-60 VDC to -48 VDC
Max input voltage range:
-72VDC
～
-36 VDC
Max output power
150W
CAUTION:
Use a power module after revision shown on the Table 9-1 for switch.