Installation Guide
QX-S5500G Series Ethernet Switches
3-5
Figure 3-5 Attaching the front mounting bracket to the middle installation position
Figure 3-6 Attaching the front mounting bracket to the power module side
3.2.3 Mount the chassis in the rack
This task requires two people.
1) One person supports the chassis bottom with one hand, holds the front part of the
chassis with the other hand, and pushes the chassis into the rack gently
2) The other person uses M6 screws and cage nuts (user supplied) to attach the switch
to the rack. Prepare the cage nuts and the screws yourself.
To Next Page
Loading...
