NEC QX-S5500G Series User Manual

Installation Guide
QX-S5500G Series Ethernet Switches
3. Installing the switch
3-3
3.2 Installing the switch in a 19-inch rack
The mounting bracket kit can be installed on the port side, power module side, or the
middle bracket installation position. Attach on the appropriate location with an actual
necessary condition .
Figure 3-2 Rack-mounting procedure

NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate location,
and attach the switch to the rack by using the mounting brackets.
3.2.1 Mounting bracket kits
Figure 3-3 Front mounting bracket kit
L1
L2
1
2
(1) Hole for attaching the bracket to a
rack
(2) Hole for attaching the bracket to the
switch chassis
3.2.2 Rack-mounting by using front mounting brackets
To install the switch in a 19-inch rack by using the front mounting brackets:
Attach the front
mounting brackets to the
two sides of the switch
Mount the switch in the
rack
Identify the mounting
position ( port side, the
power side, or middle
position ) for the mounting
brackets

NEC QX-S5500G Series Specifications

General

Brand	NEC
Model	QX-S5500G Series
Category	Switch
Language	English