NEC QX-S5500G Series - Page 134

Installation Guide
QX-S5500G Series Ethernet Switches
9. Appendix B FRUs and compatibility matrixes
9-8
CAUTION:
LSWM5XGT2PM doesn't operate by 1Gbps.
IV. LSWM5SP8PM
(1) SFP+ port LED
(2) SFP+ port
(3) Screw
(4) Ejecting lever
Table 9-5 The port LED of SFP+ description
LED status Description
Steady green
A transceiver module is normally installed on a port. The port has a link and is operating at
10 Gbps.
Flashing green
The port is sending or receiving data at 10 Gbps.
Steady yellow
A transceiver module is normally installed on a port. The port has a link and is operating at 1
Gbps.
Flashing yellow
The port is sending or receiving data at 1 Gbps.
Off
A transceiver module doesn’t installed on a port. No link is present on the port.