NEC QX-S5500G Series - Page 78

Installation Guide
QX-S5500G Series Ethernet Switches
6. Upgrading software
6-7
4) Perform the get command in FTP client view to download the file from the FTP server.
ftp> get newest.ipe
227 Entering Passive Mode (10,10,110,1,17,97).
125 BINARY mode data connection already open, transfer starting for /newest.ipe
226 Transfer complete.
32133120 bytes received in 35 seconds (896. 0 kbyte/s)
ftp> bye
221 Server closing.
III. FTP upload from a client
You can use the IRF fabric as an FTP server and upload files from a client to the IRF fabric.
To FTP upload a file from a client:
1) Log in the IRF fabric:
2) Enable FTP server.
<Switch> system-view
[Switch] ftp server enable
3) Add a local FTP user account.
# Create the user account
[Switch] local-user abc
# Set its password and access service type.
[Switch-luser-manage-abc] password simple pwd
[Switch-luser-manage-abc] service-type ftp
# Assign it to the user role network-admin for uploading file to the working directory of the
server.
[Switch-luser-manage-abc] authorization-attribute user-role network-admin
[Switch-luser-manage-abc] quit
[Switch] quit
Access a PC.
4) FTP to the IRF fabric (the FTP server).