NEC QX-S5500G Series - Page 91

Installation Guide
QX-S5500G Series Ethernet Switches
6. Upgrading software
6-20
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
9. Set The Operating Device
0. Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Enter your choice(0-9): 0
II. Using FTP to upgrade software images through the Ethernet port
1) Enter 1 in the Boot menu to access the file transfer protocol submenu.
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3):
2) Enter 2 to set the FTP parameters.
Load File Name :update.ipe
Server IP Address :192.168.0.3
Local IP Address :192.168.0.2
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0
FTP User Name :switch
FTP User Password :***
Table 6-7 FTP parameter description
Item Description
Load File Name
Name of the file to download (for example, update.ipe).
Server IP Address
IP address of the FTP server (for example, 192.168.0.3).
Local IP Address
IP address of the switch (for example, 192.168.0.2).