NEC QX-S5500G Series - Page 98

Installation Guide
QX-S5500G Series Ethernet Switches
6. Upgrading software
6-27
Figure 6-8 File transfer progress
10) Enter the M (main), B (backup), or N (none) attribute for the images. In this example,
assign the main attribute to the images.
Please input the file attribute (Main/Backup/None) m
The boot.bin image is self-decompressing...
# At the Load File name prompt, enter a name for the boot image to be saved to flash
memory.
Load File name : default_file boot-update.bin (At the prompt,
Free space: 470519808 bytes
Writing
flash...................................................................
.............Done!
The system-update.bin image is self-decompressing...
# At the Load File name prompt, enter a name for the system image to be saved to flash
memory.
Load File name : default_file system-update.bin
Free space: 461522944 bytes
Writing
flash...................................................................
.............Done!