QX-S5500 Series Ethernet Switches
4
Starting and Configuring the Switch
* NEC QX-S5526P BOOTROM, Version 720 *
* *
***********************************************************
Copyright (c) 2004-2013 NEC Corporation. All rights reserved.
Creation date : Sep 25 2013, 23:19:08
CPU Clock Speed : 533MHz
BUS Clock Speed : 133MHz
Memory Size : 256MB
Mac Address : 000fe25df2bb
Press Ctrl-B to enter Boot Menu... 1
Software of Version 5.4.8 or previous version:
Starting......
***********************************************************
* *
* NEC QX-S5526P BOOTROM, Version 509 *
* *
***********************************************************
Copyright (c) 2004-2009 NEC Corporation. All rights reserved.
Creation date : Jan 9 2009, 10:44:09
CPU Clock Speed : 533MHz
BUS Clock Speed : 133MHz
Memory Size : 256MB
Mac Address : 000fe287b008
Press Ctrl-B to enter Boot Menu... 5
In normal startup mode, the waiting time here is five seconds. If you press <Ctrl + B> within
five seconds, the Boot Menu is displayed. If you press <Ctrl + B> within five seconds, the
Boot Menu is displayed: If you perform no operation or press a key other than <Ctrl + B>
within five seconds, the system begins to automatically start up and the following
information is displayed:
Software of Version 5.4.12 or later version:
Auto-booting...
Decompress
Image........................................................................
.............................................................................
.............................................................................
.............................................................................
.............................................................................
.............................................................................
.............................................................................
.............................................................................
........OK!
Startup configuration file does not exist.
It will take a long time to get configuration file, please wait...
Press CTRL_C to break
Retrieving configuration file failed!
User interface aux0 is available.
Press ENTER to get started.
Software of Version 5.4.8 or previous version:
Auto-booting...
4-9
To Next Page
Loading...
