NEC SL2100 - SECTION 5 SOFT KEYS OPERATION - DEFAULT ADVANCED MODE 2; 5.1 Menu Soft Key

Configure the SL2100
Quick Install Guide – SL2100 with ISDN PRI Trunks rev 1.1 41
Select the phone you want to configure
Select the function from the list
Most functions will have a choice available, pick the one you want
Click the Programmable Function key to assign your selection
Repeat for other keys and phones
Click Apply to save your changes
You can copy the key assignment of the current phone to others by clicking the Apply to multiple button.
Programmable Function keys are setup within the Initial Setup wizard for Line keys or no function, you can add
further functions here.
1 Select the phone
2 Select the
Function
3 Select the
Function’s choice
4 Click the key
that you want to
set