NEC SL2100 - 5.2 Dir Soft Key; 5.3 VM Soft Key

Configure the SL2100
Quick Install Guide – SL2100 with ISDN PRI Trunks rev 1.1 42
Extension - Toll Restriction
The Initial Setup wizard will setup basic Toll Restriction.
To view, edit or test the toll restriction select the Easy Edit view
Then select Toll Restriction – Toll Restriction Assignment
In the example above:
All extensions are set to Toll Restriction class 2 for all night modes
The Common Restriction table is used to restrict dialled numbers
Prefix codes are defined that will be applied before any restricted number
Testing Toll Restriction
Enter a dialled number in the Toll Number Test box – as each digit is entered it will be checked against the Toll
Restriction tables.
 Red highlight means the number is restricted
 Green highlight means it’s permitted (applied as an exemption to the restriction tables)
Note – You must ensure that all phones can dial Emergency numbers for all available lines in
all modes
1 Select Extension
view
2 Define the
restricted numbers
3 Define the permitted
numbers for the
corresponding Restriction
table
4 Define the prefix
codes
5 Test the Toll
Restriction
Initial Setup wizard
sets the basic Toll
tables to be applied