NEC SL2100 - Parts Available for the SL2100

NEC SL2100 Communication System
Quick Install Guide – SL2100 with ISDN PRI Trunks rev 1.1 5
Parts available for the SL2100
Not all parts are included within this guide, please refer to the other SL2100 Quick Install Guides or the SL2100
Hardware Manual for a full description and installation instructions of all parts available.
IP7WW-4KSU-C1
SL2100 Chassis unit
Included within this guide
IP7WW-1PRIDB-C1
ISDN PRI card
IP7EU-CPU-C1
SL2100 CPU card
IP7EU-CPU-C1-A
SL2100 CPU card with pre-
installed IP licenses and 2hour
InMail
IP7WW-EXIFB-C1
Expansion interface card
Interface card required to connect to the
expansion chassis
IP7WW-EXIFE-C1
Expansion interface card
Interface card installed into the expansion
chassis
IP7WW-SDVMS-C1
IP7WW-SDVML-C1
InMail voicemail
Provides 15/120 hour voicemail
IP7WW-3COIDB-C1
Analogue trunk daughter card
3 analogue trunks, max. 4 per unit
IP7WW-2BRIDB-C1
2BRI card
2 x BRI circuits, 4 trunks
IP7WW-000U-C1
Trunk carrier card
Require when 082E or 008E card is not
available to install the 2BRIDB,1PRIDB or
3COIDB card
IP7WW-VOIPDB-C1
VOIP card
16 IP resources, expand to 128 with licenses
IP7WW-082U-B1
8 Digital Extension (2wire) and 2
SLT extension card
8 digital and 2 SLT extension interfaces, max
3 per unit
IP7WW-308U-A1
8 Hybrid Extension (4wire)
extension card
8 hybrid extension interfaces, max 4 per unit
IP7WW-008U-C1
8 Analogue extension card
8 analogue extension interfaces, max 4 per
unit
IP4WW-Battery Box
Battery box
External battery box for power fail backup
(batteries not included)
161893001-A
Rack mount shelf
Rack mount for SL2100 chassis unit
Refer to Prophix for all parts and licenses available in your region.
SL2100 Terminals are included in separate Quick Install Guides