NEC SV8100 - Call Forwarding

Configuration Note 3. Configuring NEC SV8100 IP-PBX
Version 7.0 15 AudioCodes Mediant E-SBC
5. From the '14 – SIP Carrier Choice' drop-down list, select Default.
6. Clear the '16 - Register Sub Mode' field.
Figure 3-4: Programming Command 10-29
7. Using the 84-39-05: SIP Trunk message customize Programming command, from
the 'Option 5: Outgoing INVITE Message P-Asserted Identity/P-Prepared-Identity
Usage' drop-down list, select Mode 2: Use P-Asserted-Identity Header Using Caller
Party Information.
Figure 3-5: SIP Message Customization Programming Command 84-39