NEC SV8100 - Page 57

Configuration Note 4. Configuring AudioCodes E-SBC
Version 7.0 57 AudioCodes Mediant E-SBC
4. Configure another manipulation rule (Manipulation Set 4) for BroadCloud SIP Trunk.
This rule is applied to response messages sent to the BroadCloud SIP Trunk IP Group
for Rejected Calls initiated by the IP-PBX. This replaces the method type ‘502’ with the
value ‘480’, because BroadCloud SIP Trunk not recognizes ‘502’ method type.
Parameter Value
Index
2
Name
Reject Responses
Manipulation Set ID
4
Message Type
any.response
Condition
header.request-uri.methodtype=='502'
Action Subject
header.request-uri.methodtype
Action Type
Modify
Action Value
'480'
Figure 4-33: Configuring SIP Message Manipulation Rule 2 (for BroadCloud SIP Trunk)