Page22of60
Directory Dialing
Operation
To use Directory Dialing from a multiline terminal with an LCD:
1. Press the Dir softkey.
-OR-
Press the Right Cursor key.
2. Press the softkey for the Directory Dialing type:
SPD–Speed Dials
EXT–co-worker’s Extensions
STA–Personal Speed Dials
TELBK–Telephone Book
3. Dial letter/number range for the party you want to call (e.g., dial 2 for A, B, C or 2).
You can enter several letters to help narrow the search.
Press # to enter additional letters on the same key (ex: TOM = 8666#6).
4. Press the Down Arrow softkey to jump to that section.
5. Press the Volume or key to scroll through the list.
If you wait too long between your selections, Directory Dialing automatically cancels.
6. Lift the handset or press the DIAL softkey, or press Speaker to place the selected call.
If you selected an outside call, it routes according to your system Trunk Group
Routing/ARS setup.
To cancel Directory Dialing:
Press the Exit key.
To Next Page
Loading...
