Page1of60
NEC SV8100 Quick Reference Guide
Answer Hold
Operation
To answer a call on a different line key or CAP key with a call in progress:
1. Receive a CO/PBX, DID/DISA/DIL/E&M incoming ring.
Answer flashes.
2. Press Answer, and answer the new call.
The Answer LED goes out. The original call is put on hold.
3. If additional calls are received, press Answer to place the current call on hold and connect to
the next call as long as Call Appearance Keys and or CO line keys are available.
Answer Key
Operation
To answer calls using the Answer Key:
1. Receive CO/PBX incoming ring.
2. Press Answer.
3. Talk with the CO/PBX incoming calling party.
4. When additional CO incoming calls are received, press Answer to place the current call on
hold and connect the multiline terminal user to the next call.
NEC SV9100 Feature Handbook
To Next Page
Loading...
