NEC SV9100 - Blind Call Transfer; Initiating a Blind Transfer

Page34of60

Last Number Redial (continued)
To check the number saved for Last Number Redial:
1. Press Redial or the Left Cursor key once.
The stored number displays for six seconds. The stored number dials out if you:
- Lift the handset.
- Press an idle line key.
- or -
- Press Speaker.
2. Press the Exit key.
To erase the stored number:
1. At the multiline terminal, press Speaker or lift handset.
- OR -
At the single line telephone, lift the handset.
2. Dial 776.