NEC SV9100 - Handling Incoming Calls; Answering Incoming Calls

Page30of60

Handsfree Answerback / Forced Intercom Ringing
Operation
To enable Handsfree Answerback for your incoming Intercom calls:
1. Press idle Speaker.
2. Dial 721.
3. Press Speaker to hang up.
This disables Forced Intercom Ringing.
To enable Forced Intercom Ringing for your incoming Intercom calls:
1. Press idle Speaker.
2. Dial 723.
3. Press Speaker to hang up.
This disables Handsfree Answerback.
To change the way your Intercom call signals the extension you are calling:
1. Dial 1.
If ringing, your call voice-announces. If voice-announced, your call starts to ring the
destination. This option is also available at single line telephones.