NEC SV9100 - Email Communication; Sending Group Emails

Page24of60

Do Not Disturb
Operation
To activate or deactivate Do Not Disturb while your extension is idle:
Multiline Terminal Using Softkeys
1. Do not lift handset.
2. Press Program softkey.
3. Press DND softkey.
4. Press Set softkey.
5. Choose from the following softkeys:
Ext ICM ALL Cfwto
Ext=Incoming Trunk Calls Blocked
ICM=Incoming Intercom, Paging, call forwards and Transferred Trunk Calls
Blocked.
ALL=All Calls Blocked
Cftwto=Call Forwards Blocked
To Cancel DND – Heading
6. Do not lift handset.
7. Press Program softkey.
8. Press DND softkey.
9. Press Cncl softkey.
Multiline Terminal Using Feature Key or Access Code
1. Do not lift the handset.
2. Press the DND feature key programmed in
- OR -
Press Speaker and dial 747.