NEC SV9100 - Station Name Assignment

Page54of60

Station Name Assignment – User Programmable
Operation
To program your extension name:
1. Press Speaker.
2. Dial 700.
- OR -
Press the Extension Name Change key
3. Press Hold.
4. Enter the name. (See Table 2-8 Keys for Entering Names below)
Your name can be up to 12 digits maximum.
5. Press Hold.
6. Press Speaker to hang up.
To program any extension name:
1. Press Speaker.
2. Dial 700.
- OR -
Press the Extension Name Change key
3. Enter the extension number to be named.
4. Enter a name. (See Table 2-8 Keys for Entering Names page 87)
The name can be have to 12 digits maximum.
5. Press Hold.
6. Press Speaker to hang up.