NEC SV9100 - Service Access Management; Managing Call Forwarding Settings

Page42of60

Redial Function
Operation
To redial the last number dialed:
1. Press the left Navigation key.
REDIAL [#] / SYS is displayed along with the last dialed number.
2. Press the up or down arrow to view the number to dial.
3. Press # or press Speaker or lift the handset or press an idle trunk key.
- OR -
1. Press the List softkey
2. Press Redial.
REDIAL -01 is displayed along with the last dialed number.
3. Press the up and down arrow to view the number to dial.
4. Press the # key or press Speaker or lift the handset or press and idle trunk key.
To scroll through the last 10 outside numbers dialed:
1. Press Redial. Each time the Redial key is pressed, it displays the next most recently dialed
number.
2. When the desired number is displayed, press the # key or press Speaker or lift the handset.
- OR -
1. Press the List softkey
2. Press Redial.
3. Press the up and down arrow to view the number to dial.
4. Press # or press Speaker or lift the handset.