NEC SV9100 - Page 52

Page49of60

Speed Dial – System / Group / Station (continued)
6. Enter the name associated with the Speed Dialing number (display telephones only).
7. Press Hold.
8. Press Speaker to hang up.
To dial a Station Speed Dialing number (multiline terminal):
1. Press Speaker.
2. Dial #7 (default Service Code).
- OR -
Press the System Speed Dialing key
To preselect, press a line key in step 1 (instead of Speaker).
3. Dial the Station Speed Dial buffer number (0 ~9).
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2
0 = Station Speed Dial buffer 10
The stored number dials out.
If you have a DSS Console, you may be able to press a DSS Console key to chain to a
stored number.
To dial a Station Speed Dialing number (Single Line Telephone):
1. Lift the Handset.
2. Station Speed Dial #7
Group Speed Dial #4
System Speed Dial #2
3. Dial the Speed Dial Memory Location.
Station Speed Dial 0~9 (Group Speed Dial xxx (none at default) or System Speed Dial 000~999)
4. Converse.