119 | P a g e
Locate the connection that you have just created and click on ‘Edit Telephone System Template.’
From the drop down menu select ‘NEC Infrontia Aspire/SV9100 Events’ from the drop down menu.
You will be ask if you wish to overwrite the current template, click yes and then OK.
Click ‘Close’ to shutdown the Collector Configuration Application and start MyCalls. From the view
menu select Audit Log Window.
Review the audit log and make sure the connections that were created have started successfully. If
they do not start check the PBX programming and review the IP address and port numbers entered in
the collector configuration application.
To Next Page
Loading...
