121 | P a g e
Select the connection that you have just created and click ‘Edit Telephone System Template.’ From
the drop down menu under Predefined Templates, select ‘NEC Infrontia European
Aspire/SV9100/SL1100/SL1000, Line/DID presented, Use Computer Date 6 Digit DDI’
When prompted, choose to overwrite the current template then click OK to save the changes. Close
the Collector configuration application when you have finished.
Look in the MyCalls Audit log and you will see if the connection to the new PBX was successful or
not.
Any new calls will appear in the call records view.
To Next Page
Loading...
