Necchi NL11C - Setting up the Telescopic Thread Stand; Open and Close the Front Cover

4
Setting up the telescopic thread stand
Extend the telescopic thread stand to its full
height, then turn until it clicks into place.
Place the thread spools or cones over the
cone holders on the spool pin.
If the machine is already threaded, straighten
the threads to prevent tangling.
Open and close the front cover
Open the front cover
Firstpushthecovertotherightasfarasitwill
go and then pull it downward toward you.
Close the front cover
Firstpullthecoverupwardandthenslideitto
the left until it locks.
Note
The front cover has a safety switch and the
machine will not sew if the front cover is
open.
How to store the accessories
1
Brush
2
Tweezers
3
Screwdriver
4
2-thread overlock converter
5
Allen key to change needles
1
23
4
5