Necchi NL11C - Page 35

28
2–Thread wrapped overlock, wide (and narrow)
Givesabeautifulnishtolightweightfabrics(2-threadoverlockconverterrequired).
Note
Use the right needle instead for a narrow stitch. Recommended cut width and thread tension
settings within brackets in the chart.
Stitch/Fabric
Thread Tension
Left 1.0 2-3 4-5 (5-6) N V 4-6 (-) - (5-7) - (-) 1-3 (4-6)
Left 1.0 2-3 4-5 (5-6) N V 4-6 (-) - (5-7) - (-) 1-3 (4-6)
Left 1.0 3-4 4-5 (5-6) N V 4-6 (-) - (5-7) - (-) 1-3 (4-6)
Left 1.0 2-4 4-5 (5-6) N V 4-6 (-) - (5-7) - (-) 1-3 (4-6)
Left 1.0 3-4 4-5 (5-6) N V 4-6 (-) - (5-7) - (-) 1-3 (4-6)
Left 1.0 3-4 4-5 (5-6) N V 4-6 (-) - (5-7) - (-) 1-3 (4-6)
2–Thread rolled edge
Foredginglightweightfabrics.Itgivesanicenishonsilkyscarves,pillowru󰀪esandnapkins.
Thread the looper with a decorative lightweight thread, such as 40 weight rayon for a beautiful
satinedge(2-threadconverterrequired).
Note
Not recommended for heavy weight fabrics.
Stitch/Fabric
Thread Tension
Right 1.0 1-1.5 5-6 R V - 5 - 4-6
Right 1.0 1-1.5 5-6 R V - 5 - 4-6
Right 1.0 1-1.5 5 R V - 5 - 4-6