Necta Colibri Espresso - Technical Specifications

4
© by NECTA VENDING SOLUTIONS SpA 09-2003 228 00
TECHNICAL SPECIFICATIONS
DIMENSIONS
ìrbiloCosserpsEtnatsnI
.gK
8333
Height = 25.59"
Height with coffee hopper = 29.13"
Width = 16.14"
Depth = 19.29"
Overall depth with door open = 32.67"
Height of cabinet = 32.28"
Weight
Power supply voltage 120 V~
Power supply frequency 60 Hz
Installed power 1.300 W
PAYMENT SYSTEM
The machine is supplied with all prearrangement for a front
validator. Specific kits are provided for the installation of
payment systems with Executive, MDB or BDV protocol.
The machine can accommodate the “cashless” payment
system, while the “change-giver” payment system must
be installed in the special support cabinet (optional).
SALES PRICES
A different programmable price can be set for each single
selection; the standard setting has the same sales price
for all selections.
COIN BOX
Made of plastic with lock as optional accessory.
WATER SUPPLY
From the mains, with a water pressure of 5 to 85 N/cm
2
.
A self-contained water supply kit (tank + accessories) can
be installed in the support cabinet (optional).
AVAILABLE ADJUSTMENTS
- Grade of grinding for espresso coffee
- Coffee and water doses by volume
- Time adjustment for instant products
- Temperature via software (see “temperature setting”
in the programming menu)
CONTROLS
- Presence of water
- Presence of coffee
- Operating temperature reached
SAFETY DEVICES
- Door switch
- Presence of coffee waste container (Espresso
models only)
- Manual-reset boiler safety thermostat
- Air-break float jamming (only with water supply from
the mains)
- Overflow solenoid valve (only with water supply from
the mains)
- Timer protection for:
Pump
Coffee unit ratiomotor
Coffee grinder
- Overheating protection for:
Doser units
Coffee unit ratiomotor
Magnets
Pump
Mixers
Coffee grinder motor
- Fuse protection for:
Main electrical circuit
Board power supply transformer