English
MPC
-2
18
2. Changing data
Not all data in the MPC
-
2 is changeable, see chapter 4.1 Animal information
function keys for an overview of changeable fields.
A field is changeable if, after pressing the Clear
-
key, the field shows dashes
flashing. The n
umber of dashes indicates the number of digits (or letters) that
can be entered (e.g. three dashes indicates three digits).
2.1 Changing a field:
Open the field with the (C) Clear
-
key; on the display will appear as many
dashes as there are digits (or
letters) to enter.
Enter new value with numeric keys 0 to 9.
If necessary enter a point with (C) Clear
-
key.
Close the field with the (E) Enter
-
key.
2.2 Restore an opened field:
The Shift
-
key is used to restore a field, opened by the (C) Clear
-
key. T
he old
value will be restored after pressing the Shift
-
key.
2.3 Two changeable fields in the display:
In some cases two fields in the display are changeable, e.g. cow number and
milk yield. The first field is changeable by the above described procedu
re. The
second field is selected by pressing the Shift
-
key, and then within two seconds,
press the (C) Clear
-
key (to open the field).