Nedap MPC-2 User Manual

English
MPC -2 29
6. Information and warnings
6.1 Animal information funct ion keys
If you wish to consult information concerning the identified cow, press the
animal information function key, the first item of the particular function key will
be listed. Pressing the same function key again will show the next listed item.
Five se conds after the last key stroke, the display will return to displaying the
cow number and milk yield.
The items that are changeable are listed below in italic and underscored .
Cow items
ACT Activity deviation percentage
COWSEP First field; separation f unction number (e.g. separation door No.)
Second field; number of separations
GROUP Group number
RESP Responder number
Feed items
ACTFDM Actual feed amount to be fed in milking parlour, also used to
dispense extra feed in the milking parlour
FDMILK To tal amount to be fed in milking parlour as calculated by PC
FD TOT Total feed amount of all five types of feed
FD BAL Actual feed amount (balance) of all five types of feed, excluding
milking parlour
FD CAL Feed calibration, enter number of portions
Milk items
SEPMLK Number of times the milk has to be separated, including current
milking
MILKT Expected minimum milk yield (milk test value)
COLOST Colostrum, yes/no
TIME Total milking time, from cluster attachment to removal
MAXSP Maximum milk speed
AVRSP A verage milk speed
MLKSP Actual milk speed
Disease items
CON D ifference in percentage conductivity compared with the average
A CON Actual conductivity
RF - LF First field; difference in percentage conductivity
in the previous milking (RF, RR, LR, LF)
Second field; difference in percentage conductivity in the current
milking (RF, RR, LR, LF)

Nedap MPC-2 Specifications

General

Brand	Nedap
Model	MPC-2
Category	Farm Equipment
Language	English