6 Nektar Panorama P4: Quick Start Guide www.nektartech.com
49 velocity-sensitive keys with monophonic aftertouch
Pitch bend and Modulation wheels. Both are MIDI-assignable.
OCTAVE DOWN / UP and PB1 / PB2 performance buttons. Press both OCTAVE buttons at once to
access the global menu. Press both PB buttons at once to select their functions.
100mm Alps motorized fader
SOLO and MUTE buttons (MIDI-assignable) plus FADER select button to bring menu for motorized
fader and buttons into view. Status LEDs for read/write modes when applicable
Eight MIDI-assignable encoders
TOGGLE/VIEW button: Used to view MIDI assignments in Internal mode. Toggles between
assignments of all eight encoders when used with dedicated communication protocols.
Nine MIDI-assignable 45mm faders
Eight MIDI and ASCII-assignable LED buttons
TOGGLE/MUTE button: Mutes MIDI output in Internal Mode. Toggles between assignments of all eight
LED buttons when used with dedicated communication protocols.
Four Mode buttons. Used to switch between Mixer, Instrument, Transport and Internal modes but
also double as each mode’s “home” or “back” button. When used without our dedicated
communication protocols only Internal mode is selectable.
High-resolution TFT display
Five menu buttons. Their functions always correspond to the menu label at the bottom of the TFT
display.
6 MIDI- and ASCII-assignable buttons. When used with our dedicated communication protocols they
act as navigation buttons for selecting the DAW track, the patch on instruments, bank switch, etc.
Data encoder for changing values for parameters and navigation. Also used as an extra MIDI encoder
in some menus.
Eight MIDI-assignable encoders
Eleven MIDI- and ASCII-assignable buttons, plus a SHIFT button which gives access to a total of 22
assignments. When used with our dedicated communication protocols the buttons are assigned
automatically to 11 transport buttons, and the SHIFT button gives access to 11 user-configurable
MIDI or ASCII commands.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
To Next Page
Loading...
Need help?
General
