Weighing Settings9.8
The weighing settings include:
•
Changing the default weighing type
•
Zeroing the weighing platform.
•
Setting the GEO code that corresponds to the geographical location of the Mailing
System.
Changing the default weighing type
Available weighing types are :
•
Standard Weighing to weigh a mail piece with the Weighing Platform,
•
Manual Weight Entry to enter manually a weight value.
How to change the default weighing type
To change the default weighing type as Supervisor (See How to Log in as Supervisor
on page 136 ):
1. The Weighing type screen appears
The Weighing type screen appears
2.
Select the new default weighing type with and .
3.
Press to confirm.
Zeroing the Weighing Platform
You can reset the Weighing Platform in the following ways:
•
Set to zero : Resets the weight to zero
•
Re-zero : Physically adjusts the weighing platform to zero.
149
| Page 149 | | dec-12-2013 12:37 |
9
Configuring your Mailing System
To Next Page
Loading...
Need help?
General
